Brightflag vs SimpleLegal vs Onit: Which E-Billing Platform Fits Your Legal Team?
Brightflag, SimpleLegal and Onit can all read a LEDES invoice. The differences show up in multi-currency VAT handling, ERP integration and the hours your team spends on setup and upkeep.
What you're actually choosing between
Most legal teams that shortlist these three are asking a narrow question: who reviews outside counsel invoices so our lawyers don't have to, and how much configuration are we willing to own? The Brightflag vs SimpleLegal decision usually comes down to whether you want invoice review driven by machine-learned categorization or by rules you write and maintain yourself. Onit earns a place on the list when you want a third option: a configurable enterprise legal management platform that can run intake, contracts, matters and spend in one place, provided you're prepared to staff the build.
One structural point before features. SimpleLegal has been part of Onit's product family, where it's positioned as the faster-to-deploy, mid-market option, while Onit's flagship platform targets large, workflow-heavy departments. If you're evaluating both, ask Onit directly how the two roadmaps relate and whether you could migrate from one to the other later. Brightflag is a separate product built around automated invoice review and legal spend analytics, and it's well known among multinationals and in Europe.
We compare the three on five things: automated review, LEDES and multi-currency/VAT handling, matter management depth, ERP integration and implementation effort. Verdicts by team size come at the end. This comparison draws on vendor positioning and general market knowledge, not hands-on testing, so verify every claim in a proof of concept.
Automated invoice review: learned categorization versus rules you maintain
All three vendors check invoices against your billing guidelines. They differ in how much of that checking happens without someone writing a rule for it.
Brightflag is known for applying machine learning to line items. It classifies the work described, which matters when firms code entries poorly or don't use UTBMS codes at all. That's common with panel firms outside North America, where task-based coding is less widespread. It then flags issues such as block billing, staffing that doesn't fit the work, vague descriptions and rate deviations. The reviewer should get a short list of exceptions instead of a 40-page invoice.
SimpleLegal works mainly through configurable rules: rate caps, timekeeper approvals, expense limits, required codes and keyword flags. Rules are predictable and easy to audit. The trade-off is that the system only catches what you anticipated, so someone has to update the rules whenever you sign a new engagement letter or change guidelines.
Onit combines rules-based review with additional automated review options, and it has added benchmarking and pricing analytics through acquisitions. The engine is capable, but it's configured per customer. How well review works depends on how well you set it up.
Our view: if your firms code inconsistently or bill in several languages, learned categorization saves the most reviewer time. If your panel is small and disciplined about UTBMS codes, a rules engine does the job and usually costs less.
LEDES invoice review, multi-currency legal billing and VAT
All three accept the common LEDES formats. Accepting a file tells you little, though. Cross-border buyers should test what the platform does with tax lines and currency once the file is in.
The relevant formats are LEDES 1998B (the basic US-originated format), LEDES 1998BI (the variant with fields for tax, currency and tax IDs) and LEDES XML 2.x. Firms in the UK, the EU, the Gulf and Asia-Pacific often send 1998BI files or PDFs. Smaller local firms in India, Latin America or Africa may send PDFs only, so ask each vendor how it converts PDFs to structured data and who corrects the errors that conversion produces.
| Capability | Brightflag | SimpleLegal | Onit |
|---|---|---|---|
| LEDES 1998B / 1998BI / XML | Supported | Supported | Supported |
| Non-LEDES / PDF invoices | Positioned as a core strength | Supported; review tends to be more manual | Supported; depends on configuration |
| Multi-currency reporting | Designed for multinationals | Supported; verify FX rate source and timing | Capable but configuration-dependent |
| VAT/GST line handling | International focus; test your cases | Test reverse-charge cases | Configurable to entity and tax rules |
| Unstructured, multi-language descriptions | Machine-learned categorization | Mostly keyword rules | Rules plus add-on review options |
Treat the table as a list of questions for each vendor, not a scorecard.
On tax, the rules differ by country. Cross-border legal services between businesses in the EU and UK are often subject to reverse-charge VAT. India has e-invoicing requirements for larger businesses. Mexico, Saudi Arabia and Italy each run invoice clearance or reporting through government systems. In most cases your e-billing tool isn't the legal tax invoice of record. Its job is to pass correct net, tax and currency values to your ERP. Have your tax adviser confirm the treatment for each billing entity before go-live.
Matter management depth and legal spend analytics
This is where the three products are furthest apart.
Onit goes deepest. You can build custom intake forms, approval chains, matter types, document workflows and dashboards. A department that handles litigation, regulatory, employment and M&A matters, each with different fields and approvers, can model all of it. The cost is administration: expect to need a legal ops or systems person, sometimes full-time, to maintain the configuration.
SimpleLegal covers matter management for most mid-sized departments: intake, budgets against actuals, accruals, vendor management and document storage. It's opinionated. That's why it deploys quickly, and why it can feel restrictive if your processes are unusual.
Brightflag handles matters, budgets, accruals and vendor management well enough for most spend-focused teams. Its real strength is spend analytics. Because line items are categorized consistently, you can compare what different firms charge for the same kind of work, such as discovery hours per matter, partner leverage or rates by country, without manual tagging. If your board-level question is "what are we paying for, and with whom?", clean data matters more than workflow depth.
ERP integration, implementation effort and cost drivers
Spend data does nothing until approved invoices reach accounts payable. All three vendors position themselves as integrating with major ERPs such as SAP, Oracle, Microsoft Dynamics, NetSuite and Workday. Ask each whether your instance gets a standard connector or a custom build, and who maintains it when your ERP is upgraded.
| Factor | Brightflag | SimpleLegal | Onit |
|---|---|---|---|
| Typical go-live | 2-4 months | 1-3 months | 4-9+ months |
| Indicative annual subscription | $40k-$200k+ | $15k-$80k | $75k-$350k+ |
| Indicative implementation fees | $10k-$60k | $5k-$30k | $50k-$250k+, often via partners |
| Ongoing admin need | Low to moderate | Low | Moderate to high |
These are typical 2026 market ranges, not quotes. Actual prices vary by contract, region and invoice volume, so confirm them with each vendor. The biggest cost drivers are annual invoice volume or spend under management, the number of legal entities and currencies, ERP complexity, the number of panel firms to onboard, and add-on modules such as contracts or analytics.
Say a hypothetical 40-lawyer department has $25 million in outside spend, 60 firms, three ERP entities and four currencies. Onboarding the firms will often take longer than the software setup. Budget time for vendor training and a grace period for invoices that fail validation.
Red flags to test before you sign
- Scripted demos only. Insist on a proof of concept using 50-100 of your own past invoices, including PDFs and non-English entries. That shows you the real exception rate.
- Vague answers on FX. Ask which exchange rate the platform uses (invoice date, approval date or month-end) and whether it matches your ERP. A mismatch creates reconciliation work every month.
- Data residency hand-waving. If you're subject to GDPR, UK GDPR, India's DPDP Act or Gulf data rules, get written confirmation of hosting regions, subprocessors and transfer mechanisms.
- Spend-based pricing with no cap. If spend spikes because of a large dispute, your subscription shouldn't automatically rise with it.
- Implementation that depends on one partner consultant. This mostly applies to Onit builds. Make configuration documentation a contractual deliverable.
- Fuzzy roadmap commitments. Given the Onit and SimpleLegal relationship, ask how long each product will be supported and what a migration between them would involve.
Verdicts for three kinds of buyers
A 5-lawyer in-house team
Choose SimpleLegal if outside spend is high enough to justify a dedicated tool, roughly above $1-2 million a year across a dozen or more firms. It's the quickest to stand up and needs the least administration. Below that level, a structured AP approval process and a quarterly spreadsheet review may be enough for now. Onit is too much platform for a team this size.
A 40-lawyer department
This is the real Brightflag vs SimpleLegal contest. Pick Brightflag if invoices are messy, your panel spans several countries or executives want benchmarking data, because automated categorization cuts review hours as volume grows. Pick SimpleLegal if your firms are mostly domestic, LEDES-compliant and stable, and you value predictable rules and lower cost. Choose Onit only if you also need configurable intake and workflow across practice groups and can staff an administrator.
A multinational using panel firms in several countries
Start with Brightflag. Its positioning around multi-currency billing, VAT lines and unstructured multilingual invoices suits a panel spanning London, Frankfurt, Dubai, Singapore, São Paulo and Mumbai better than rules-first alternatives. Choose Onit instead when the goal is one enterprise platform for matters, e-billing, contracts and intake across the whole legal function, and you have the budget and in-house team for a long build.
Decision rule: pull 100 recent invoices. If more than a third are PDFs, lack UTBMS codes or arrive in a currency other than your reporting currency, run a proof of concept with Brightflag first. If not, run SimpleLegal first and keep Onit for the case where workflow depth, not invoice review, is what you're buying.
Frequently asked questions
Do we still need people to review invoices after implementing automated LEDES invoice review?
Yes, but there's much less to review. Automated review flags exceptions such as rate breaches, block billing and vague entries, and a lawyer or legal ops analyst decides what to do with each one. Most teams route flagged lines to the matter owner and send clean invoices to AP with a light-touch approval.
Can these platforms handle VAT and GST correctly for every country our firms bill from?
They can capture and pass through tax lines from LEDES 1998BI and structured PDFs, but they usually aren't your legal tax invoice of record. Reverse-charge rules, e-invoicing requirements and withholding taxes differ by country. Confirm the treatment for each billing entity with a qualified tax adviser before go-live.
How long does it take to onboard outside counsel to a new e-billing platform?
Software setup can take weeks. Getting dozens of firms to submit compliant invoices commonly takes a few months. Plan for vendor-led firm training, published billing guidelines and a grace period in which non-compliant invoices are returned with guidance rather than rejected outright.
Written by the Lexstack Cloud editorial team. Prices, features and rules change often - confirm details with the vendor or a licensed professional before you decide.